Feature of Electric violin music

Far beyond the examples do not have to walk. A vivid illustration of what has been said – electric violin music 3D-printer. If you believe the source of the network, it was made on the corresponding printer.

The form author of the “borrowed” from the Stradivarius. However, registration is not concerned – get a modern design, it is extremely extravagant.

What’s interesting: the development was to bypass the traditional scheme. The transparent body is a single piece.

The foregoing was made possible by laser stereolithography (or short – SLA).

As 3Dvarius sounds? It is not bad, professionally. It is enough to watch a video electric violin music.

Source: geeky-gadgets

The post Electric violin music printed the 3D-printer appeared first on Raqwe.

Three-dimensional printing technology continues to develop rapidly. Interesting devices on the market is growing. Let’s look at a new 3D printer RepRap X350.

The developers of the RepRap trying to keep up with competitors. It was learned that the German company has announced a new 3D-printer. Let’s see the main features of the new RepRap X350.

Features of the RepRap X350

System new 3D printer called X350. It offers volume assembly 350 x 200 x 210 mm. Fairly large size figures for the new generation of the 3D printer.

A complete presentation of the device will be held on May 18 – in the framework of the exhibition the California Rapid Fair.

The speed of the model – 150 mm/sec. With the overlay layer thickness of 0.02 mm.

It supports 3-point heated and a variety of the thread: PVA, Laywood, PS, SmartABS, PP, Laybrick, PLA, ABS, Bendlay, and Soft-PLA.

In addition, a new RepRap X350 has a 28-pound printer is able to boast an attractive design. And as convenient operation. Without the “Raisin” has not been: RepRap can monitor over the Internet – via the browser (via the web interface).

It is enough to connect via LAN or Wi-Fi.

Conclusion of the RepRap X350

The new 3D printer RepRap X350 has a wonderful platform. However, the cost is very high – 2500 euro. This is a price pre-order with a decent discount. After June 30, the amount will increase significantly.

Source: Geeky-Gadgets

The post RepRap X350 a new 3D-printer appeared first on Raqwe.

In our world, there are many amazing things that can be realized and make a special collection for you. Many opportunities to contribute to this 3D printing. In our time, it takes of particular importance especially a lot of attention.

Interesting possibilities for your reimplementation will help you 3D printer. But how do you know Most of the printers can not afford for everyone. As the price of 3D printer is very high today.

But a Canadian company called Mosaic Manufacturing went the other way and realized a completely new type of work 3d printer. Let’s see the ability to perform a new type of 3D printing.

Creator Chris Labelle updated its design Palette 3D Printer. And now achievable opportunity to print 3D models have become more available to people.

The basic principle of the updated model Palette 3D Printer

This so-called colored threads delivery system that provides an easy and simple work. As a result, we can get a very remarkable color model and very complex shapes.

The main control unit supplies the material available to any 3D printer device. Thus, the implementation and execution of the models is simplified.

System from the Canadian manufacturer Palette 3D Printer is provided by supplying wires thickness of 1.75 mm. Since it’s standards for most 3D printers used in our time.

At the moment, Canadian manufacturer Mosaic Manufacturing works together with the project Kickstarter. For realization of his invention for mass production. The cost of material feeding Palette 3D Printer will be 599 dollars. Of course this is not a cheap toy. But if you compare other similar devices on the market, such as Cube Pro C, the price is 4990 USD. So you can make conclusions themselves.

In conclusion Palette 3D Printer

Many modern devices and technologies depends on our success thinking. We need to understand why we live and what our opportunities. Every day, go ahead and achieve great goals will help us to be closer to perfection.

Source: KickStarter, Geeky-Gadgets

The post Palette 3D Printer – new possibilities to a new level appeared first on Raqwe.

The development of technology in our world is gaining mad pace. What is the reason? The main reasons for the development and promotion of our new and totally positive peace. And every day we all Approximations and become one step closer to perfection.

Today would like to talk about 3D printing. Let’s see what advances we have made and what it will lead us.

Many companies manufacturers every day improving and work on 3D printers. To date, a major step in the development of not only 3D printers. But the development of 3D scanning of objects.

A lot of time was spent on the improvement and development of 3D printer and scan objects. And as you can see, all the work done is not in vain. Many objects contribute to the production of those components and mechanisms that will help to improve the production of certain components for small producers directly in their place. This will reduce the delivery time and the time of manufacture of the product itself.

But the main problem of the production facilities was the material of which produces object itself. And this material you know the usual plastic. And this plastic was not suitable for certain parts of our lives. The structure of this plastic is not consistent with the indicators that need a standard. Plastic basically had a very strong and “not” solid structure.

But now the producer of Disney Research moved to a new level of production. And can use a different kind of material for its production of parts. And at the moment of their 3D printer can print materials from soft and durable material structure. This will allow the use of elements of building.

The basic principle of the new 3D printer from Disney Research

The 3D printer that is capable of printing a soft and flexible material has the basic elements. Includes a printhead and a laser knife.

An object produced in two stages: first, the material lays down, basically that the material has a fabric structure. Then the process 2d laser knife burns a certain form laid down by the program. And so we get the desired object to us.

Every day we see new opportunities for our implementation. And technology in our world comes in small steps, but with a gorgeous result.

Source: DisneyResearch

The post Manufacturers Disney Research using new material for 3D printing appeared first on Raqwe.

Developers have created a special kit that allows you to assemble your own humanoid machine. Without the help of expert documentation confusing and complex tools.

Need only a screwdriver, 3D-printer and some free time.

The set PLEN2 have all the necessary electronics. Three-dimensional printing will help to create the body and some mechanical parts. Schemes are available in the public domain.

The basic design is easy to change. Nobody forbids to give the unique features of the new product.

What happens in the end? Small “humanoid” capable of repeating the movement of people to carry light objects and even dance. Expand the list of tricks is simple – by programming.

For enthusiasts and teaching children the basics of robotics – the real thing.

Pre-orders are accepted on Kickstarter. Issue price – US $ 499 (for the base version).

Source: Geeky-Gadgets

The post PLEN2 robot can be printed on 3D-printer appeared first on Raqwe.

Company Natural Machines introduced a new type of 3D printer, the purpose of which – to work with food. The printer itself can not cook, he just “print” beautiful dishes from ingredients laid down by the user.

Prior to joining the printer the user is prompted to grind the main components of food, and the resulting mass lay in containers.

In this case, the creators of the printer compare it with the concept of the concept of microwave ovens when they first came out: first, there is resistance to the idea, and then it gets faster recognition device and spreads very quickly in the kitchen in many countries.

Printer, if properly grind the ingredients can “print” a very beautiful dishes, laying them on a plate in the form of geometric shapes.

The estimated price of the gadget – $ 1,300.

Source: NaturalMachines

The post Foodini: new 3D printer that can print food appeared first on Raqwe.

Unusual imagination shown in the Technology Research Center of Finland. Specialists institutions have come up with quite extraordinary energy generator. Device looks like a small tree. Growing in a pot.

Design serious, of course, difficult to call. However, this is a very effective device. Converted into a current light, temperature and even vibration.

Resource sufficient for charging mobile phones and other small gadgets.

Design made in the spirit of the time – from printed on 3D-printer parts. In the role of the leaves are the solar panels are a special kind (collected from organic components).

Obtained with the help of their electricity through conductors enters the “trunk”. Equipped with appropriate interfaces for the connection.

The total capacity of one tree is not too large

However, the authors of the project argue that increase the performance is extremely easy.

The technology is scaled without restrictions. You can create even a whole forest. Which will provide a “power” is not only mobile devices, and all devices in the home.

So far only said the demonstration approach. Will the concept in real life? After a few years know.

Source: gizmag

The post New Recharge the gadget from the tree? No question! appeared first on Raqwe.

Good news for all who are interested in the theme of the three-dimensional printing. Famous, Autodesk announced the release of the “powerful” printer Ember 3D.

Solution suitable for both professionals and enthusiasts. Having the extra 5995 dollars, of course. It is so much worth stereolithography platform.

The minimum thickness of 10 microns (50 to X and Y).

This allows us to manufacture all sorts of things: jewelry, art, medical devices, prototypes, toys and individual parts of complex structures.

Supported operational printing facilities ultra-high resolution – from any of the popular program for the design (or even from the web site).

Everything happens as quickly as possible, it is literally on an intuitive level. Manage the system very comfortable and easy. The creators of Ember 3D installation designed so that the developers were thinking exclusively about creativity. And not any of the buttons must be pressed.

Displacement assembly 64 mm by 40 mm by 134 mm. Speed – on average – about 15 mm / hour.

Sounds great (albeit very expensive). Learn conditions of purchase device on the official site Autodesk.

The post Modern 3D-printer Autodesk Ember 3D is already available appeared first on Raqwe.

Already, this question can be answered in one word – everything. But the human imagination has no boundaries. Therefore I propose to you a selection of the most unusual things that have been printed on a 3D-printer. Ready to be surprised?

A real man in your life is to do three things: raise a son, plant a tree and build a house. Now imagine such a dialogue:

Do you think it’s a question of the future, and not very fast? No, my friends, it is a reality. Chinese company has managed to build 10 houses in just a day. Details are printed on 3D-printer (they took four). Each house was 10 meters in width and 6.6 meters in height. Yes, the job is not easy, but the cost of such an architectural marvel just $ 5,000.

By the way, to decorate your new home, too, will be enough 3D-printer. Only need to stock up on the necessary raw materials. For example, these lamps in the form of animals were just “printed.” Can you imagine what a difficult job?

Walk so to walk. House of the 3D-printer itself did, so why not “print” and the car? It is thought so American engineer Jim Kor, and set to work. Over the past three years, he made two machine model Urbee in a futuristic design. I do not want you, of course, frustrating, but it can be the electric drive of 64 km, its main “power” – gasoline. With 38 liters of fuel, he is able to overcome up to 4000 km. The maximum speed – 112 km / h.

Theme with 3D-printers is very interesting, because imagine what you can do for yourself “print” a house or a car. But it is important in life is quite another. That’s right, I’m talking about food. You will not believe, but this task he could handle. Would you like pizza? No question. In 2013, Anjan contractor won the Grand 125 thousand. Dollars. He had to create a 3D-printer capable of making food for astronauts. Here it is – RepRap Mendel. Apparatus that prints food and woman can replace the kitchen.

Continuing the theme of food, I can not remember the Modern Meadow their goal – to print these pieces of meat from the protein material. You can prepare your own juicy steak (without meat in the refrigerator) in just a few clicks. Everyone’s dream, I think.

The next possibility of 3D-printers calls into question the safety of the world. Solid Concepts Company boasts of its ability to create real firearms by using the hero of our today’s article. The main thing that sketches the project is not leaked to the Internet.

Do not like to shop and choose her shoes? Buy 3D-printer, and “print” his sneakers at home. It is only necessary that materials be found somewhere. Sneakerbot from Recreus I, frankly, do not really like. But the designer collection of shoes Jeanne Kittani can appreciate the beautiful half of humanity. It looks very interesting.

Cocoa wise man said that our life is made up of different things. So 3D-printer allows you to create all these small details. Surfboards, jewelry, furniture, musical instruments, artificial limbs, and even different kinds of human organs (cartilage, for example), spare parts for different instruments and generally everything that your heart desires. The implementation of some crazy ideas can only prevent the lack of imagination.

Now a lot of people are of the opinion that the 3D-printer is waiting for failure, but in 1983 no one believed in the mass market personal computers, and in 1993 was the same story with the Internet.

The post 3D-printer for printing? appeared first on Raqwe.

Not so long ago, HP announced its decision to split into two parts, HP Inc. and Hewlett-Packard Enterprise. More details about the split of the company 3D-printing 2015, you can learn the material on our site. Many said that, despite the very large reductions, this move could significantly improve the situation at HP. And, it seems, we can already see the first details of what good preconditions is still there.

As was stated in the separation of a portion called Hewlett-Packard Enterprise will deal with various corporate decisions, such as servers, cloud services and other pieces that need more branched companies to function effectively. In turn, HP Inc. Focus on products those are closer to the end user, such as laptops, PCs, tablets, etc. But apart in this list are such things as 3D-printing 2015. And last week introduced a new technology called Multifetal Fusion Technology, which can significantly affect the balance of power in the industry.

By the way, last week, was shown another product that is closely associated with 3D-printing 2015, namely HP Sprout , in which a three-dimensional scanner, and there are many very unusual features. More you can read about it in the article on our website.

HP is taking a step in the direction of leadership in the field of 3D-printing 2015

I do not need to be super-expert in the field of IT, to understand that for the 3D-stamp of the future. Scenarios of use are very diverse and yet confined to technical progress. For example, some of which you can read in our article on how to use the 3D-printing 2015 at home.

To date, the markets of 3D-printing 2015 are not yet formed. This is especially touching segment of “home” devices. Until now, there are quite successful projects on platforms like, which provide an opportunity to “ordinary people” realize their ideas, not only on paper but also in a more three-dimensional shape. The fact that small companies can quite easily break into the market, largely due to the absence in it of large players who have trampled all by itself at the expense of production capacity and capital.

And here is the company HP (or rather, already HP Inc.) first spoke about his plans to conquer the segment 3D-printing 2015. Make it she plans, as already mentioned, with the help of technology MultiJet Fusion, which allows you to make a more robust and detailed objects than modern 3D-printing 2015. This effect is achieved, inter alia, due to the fact that printing occurs not points and entire surfaces.

Unfortunately, the mass of such technology 3D-printing 2015 will come only in 2016 that pretty soon. But while HP is poised to become the first mass producer, who will conquer the market of 3D-printers. It is possible that in the near future, the verb will mean “print in 3D”, as it is now means “multiply on the copy machine.”

The post HP is taking a step in the direction of leadership in the field of 3D-printing 2015 appeared first on Raqwe.