The project works with Mektepbayeva robotics Ernesto Rodriguez and marketer Irina Rumshina. The main part of two rings – a base, where the electrodes are painkillers and Cartridge with chip and disposable needle. Each ring will be supplied with three cartridges, so that the blood test could be carried out three times (for example, on a course of treatment).

How does it work of intelligent diagnostic ring?

Before using the intelligent diagnostic ring should be worn on the thumb, and the electrodes almost immediately reduce the sensitivity of the finger. After pressing the needle penetrates the finger, the result of which is getting blood on the diagnostic chip.

If the infection has been detected, the corresponding LED lights, located on the ring. Plus, all of the data ring transmits via Bluetooth to a paired smartphone.

“We have developed a method for painless blood collection using neuromodulation by an electric current. For detection of antibodies, we use the lab on a chip based on a paper that does not require any source of energy “, – he clarified the principle of the ring Damel Mektepbayeva.

Problems and Plans

Now the intelligent diagnostic ring as a system does not yet exist – the fact that the developers create different elements of the ring separately. Also, individually held and test operation – all the working parts of the ring, there is no problem.

It is also interesting that the design of the ring is conducted in three countries. In Mexico, we are working on the hardware, the software is developed in Peru and Kazakhstan conducts research in the field of biotechnology, plus finalized diagnostic laboratory on a chip.

It is clear that research of this kind can not be carried out without money. And the project receives investment and premium. So in November 2014, the team received a prize Google, D.camp, on World Startup Competition (Korea). At the end of December last year, the team won in the Startup Chile, also received the award. Developers have received several awards at various technology events, plus a grant of $ 30 thousand. The Ministry of Education and Science of Kazakhstan.

The total amount required for the project and access to international markets is estimated at $ 2 million.

How much is intelligent diagnostic ring?

According to the developers, the cost of the intelligent diagnostic ring Hoope is about $ 50. This is not just cheap, very cheap, considering that the ring allows you to test for the presence of 4 different sexually transmitted diseases, not once but three times.

Source: hoope

The post Intelligent diagnostic ring Hoope – himself venereologist appeared first on Raqwe.

Feature of new LED lights

Both models are made in a sealed aluminum housing, the LED is protected by a mineral crystal with anti-reflective coating. New LED lights housing, according to the manufacturer, is able to withstand a drop on a rigid surface with five-foot height and immersion in water (IPX8) to a depth of 2 meters. Length Nitecore MT10A equivalent to almost 108 mm, maximum diameter of 25.4 mm and weight of the lamp – 60.7 grams. Model Nitecore MT10C reaches a length of slightly more the than 91 mm, the diameter of 25.4 mm and weighs less than 57 grams.

Functionality and new LED lights models Nitecore MT10A and Nitecore MT10C are almost identical, the key difference, except for the size and weight – power supply. In Nitecore MT10A batteries can be used as the format IMR14500, and AA, while the size Nitecore MT10C allow you to use only one battery IMR18350 or CR123. The design submitted by lanterns, in the same way as the model Nitecore MT20C, provides two independent LEDs – White Cree XM-L2 U2 with a maximum output of 920 lumens and a range of up to 170-190 meters illumination and low-power red LED for operation at short distances.

Lanterns and MT10A MT10C provide up to ten modes, including five modes of brightness white new LED lights for the main and two for the red, in addition, there is a mode SOS, Strobe, and Location Beacon. Modes of brightness lamps are identical, using lithium-ion batteries IMR14500 (3.7V 600 mAh) and IMR18350 (3.7V 700 mAh) uptime will also be almost identical – Ultralow (1 lum., 100/120 h.), Low (70 lum., 5 hrs.), Mid (180 lum., 1.45 h.), High (500 lum., 0.45 h.) and Turbo (920 Lumens, 0.30 h.).

The new handheld new LED lights Nitecore MT10A and Nitecore MT10C will be available in the coming weeks, the estimated retail value will be 50 and 55 dollars respectively.

Source: Nitecore MT10A and Nitecore MT10C

The post New LED lights Nitecore MT10A and Nitecore MT10C appeared first on Raqwe.